Products

Fire Resistant Sleeves & Mattes

High Grade Silicone Rubber Bonded to Woven Fiberglass Matting

REX Silicone Shield is designed to protect hoses, wires and cables from the hazards of high heat and occasional flame. It protects continuously to 260 °C / 500 °F and will withstand a molten splash at 1200 °C / 2200 °F. Made of woven fiberglass yarns in a flexible substrate, it is then coated with a high grade silicone rubber.

Resistant to hydraulic fluids, lubricating oils and fuels, REX Silicon Shield with a minimum average weight per square yard of 96 ounces, insulates against energy loss in piping and hosing, protects employees from burns and allows shielding of induction furnace cables from splashes of molten metal.

With a minimum average per square yard of 96 ounces, it is available in 40 inch wide, cut to length rolls.

PHYSICAL PROPERTIES
Coating High Grade Flame Resistant  Silicone Rubber
Weight, oz/sq yd, nominal 96
Thickness, inches, nominal 0.125
Flame Resistance Excellent
Oil and Hydrocarbon Resitance MIL-C-20696, Sect. 4.2.4
Abrasion Resistance Excellent (Silicone side)
Temprature Rating:  
Coating:   -65°F to 500°F continuous; transient exposure to 600°F
Base Fabric:   1000°F/540°C continuous
Base Fabric can be certified to: MIL-Y-1140
MIL-I-24244
Finished Product can be certified to: MIL-I-24244
ASTM E84.84A
ASTM E162

High Grade Silicone Rubber Bonded to Fiberglass Sleeve

REX Silicone Sleeve & Tape is designed to protect hoses, wires and cables from the hazards of high heat and occasional flame. It protects continuously to 260 °C / 500 °F and will withstand a molten splash at 1200 °C / 2200 °F. Made of knitted fiberglass yarns in a flexible substrate, it is then coated with a high grade silicone rubber.

Resistant to hydraulic fluids, lubricating oils and fuels, REX Silicon Sleeve & Tape insulates against energy loss in piping and hosing, protects employees from burns and allows “bundling” of wires, hoses and cables.

The Braided version allows qualified hose assemblies to pass AS1055D testing under stated flow and pressure conditions.

Available Sizes (ID): 1/4″ (6mm) through 5″ (127mm)

PHYSICAL PROPERTIES
Fiberglass Type E Silicone Rubber
Breaking Tenacity 1.71 gf/TEX Std and Wet Durometer, Shore A Initial 35
Tensile Strength 450,000 - 500,000 psi Aged 240hrs @ 200°C 45
Breaking Elongation 4.81% Std and Wet Tensile Strength  Initial 875
Elastic Recovery 100% Aged 240hrs @ 200°C 800
Average Stiffness 2824.3 cn/TEX Elongation % Initial 500
Effect of Heat Will not burn Aged 240hrs @ 200°C 200
Retains 75% tensile at 343°C Flammability, UL94   V-1
Softens at 732 -877 °C Dielectric Strength (Volts/mil)   485
Melts at 1121 - 1182 °C      
Effects of Acids and Alkalis Resistance to acids is fair        Good resistance to most alkalis      

High Grade Silicone Rubber Bonded to Woven Fiberglass Matting and Secured with a hook & Loop Closure.

Fire Sleeve with velcro

REX Silicone Shield with a Hook and Loop Closure is designed to protect hoses, wires and cables from the hazards of high heat and occasional flame. It protects continuously to 260 °C / 500 °F and will withstand a molten splash at 1200 °C / 2200 °F. Made of woven fiberglass yarns in a flexible substrate, it is then coated with one side high grade silicone rubber.

Its unique Hook and Loop Closure allows application in-situ without the need to dismantle and reconnect fittings and terminations. Repair of existing installations is performed with a minimum of labor and downtime.

Resistant to hydraulic fluids, lubricating oils and fuels, REX Silicon Shield with a minimum average weight per square yard of 96 ounces, insulates against energy loss in piping and hosing, protects employees from burns and allows shielding of induction furnace cables from splashes of molten metal.

Available Sizes (ID): 1″ (25mm) through 12″ (305mm)

PHYSICAL PROPERTIES
Coating High Grade Flame Resistant  Silicone Rubber
Weight, oz/sq yd, nominal 96
Thickness, inches, nominal 0.125
Flame Resistance Excellent
Oil and Hydrocarbon Resitance MIL-C-20696, Sect. 4.2.4
Abrasion Resistance Excellent (Silicone side)
Temprature Rating:  
Coating:   -65°F to 500°F continuous; transient exposure to 600°F
Base Fabric:   1000°F/540°C continuous
Base Fabric can be certified to: MIL-Y-1140
MIL-I-24244
Finished Product can be certified to: MIL-I-24244
ASTM E84.84A
ASTM E162

High Grade Silicone Rubber Bonded to Fiberglass Tape

EX Silicone Tape is designed to protect hoses, wires and cables from the hazards of high heat and occasional flame. It protects continuously to 260 °C / 500 °F and will withstand a molten splash at 1200 °C / 2200 °F. Made of knitted fiberglass yarns in a flexible substrate, it is then coated with a high grade silicone rubber.

Resistant to hydraulic fluids, lubricating oils and fuels, REX Silicone Tape insulates against energy loss in piping and hosing, protects employees from burns and allows “bundling” of wires, hoses and cables.

  • Typical Applications:

  • Induction heating furnace coil insulation
  • Coke oven door seals
  • Cable and wire insulation (electrical and thermal)
  • Infrared radiant diffusers
  • Fuel line insulation
  • Flange covers
  • Pipe hanger insulation Furnace curtains
  • Gasket and wrapping material
  • Characteristics Of Silica Products:

  • Continuous Temperature: 1000C
  • Melting Temperature: 1650C
  • Available Sizes For Silica Tape

  • Thickness: 0.4mm, 0.8mm
  • Width: 20.00mm t0 1000.0mm
  • Available Sizes For Silica Cloth:

  • Thickness: 0.4mm, 0.8mm
  • Width: 1000.0mm