Products

Gland Packing

Gland Packing, Gland packings by rexseal.com

This packing is manufactured using 100% virgin PTFE yarns Densely Impregnated with Rflon PTFE dispersion which Enables it to handle high pressures. The packing has non toxic and inert constituents which ensue safety & purity of the Medium


Service Conditions:

Acid, alkalis, Gland areas where zero tolerance to contamination is required, dyes, paper, pulp,high Pressure valves.


Technical Specifications

рH Temp°C Pr.Bar Velocity Density Size mm
0-14 -225 to +275 350 0-20 m/s 1.4 to 1.6 g/cm 2 3 to 50
Synthetic PTFE fiber

This packing is manufactured using synthetic PTFE yarns, they are suited for Low pressure in Food and pharmaceutical Industry


Service Conditions:

Clean water handing pumps & valves, Food, Chemicals and pharma industries.


Technical Specifications

рH Temp°C Pr.Bar Velocity Density Size mm
0-14 -200 to +250 200 0-20 m/s 1.4 to 1.6 g/cm 2 3 to 50
Gland Packing manufacturers in mumbai

This is Braided from PTFE GRAPHITE Fibers, it has self lubricating property which assists dissipation of heat which ensures negligible hardness, no friction resulting in minimal shaft wear.


Service Conditions:

Oils, hydrocarbons, solvents, acids, alkalis, detergents, distilleries, chemicals, dyes, intermediates, pesticides.


Technical Specifications

рH Temp°C Pr.Bar Velocity Density
0-14 -240°C to 300°C upto 400 BAR 0-20 m/s 1.3 to 1.7 g/cm2
Gland packings by rexseal.com

This gland packing is made from 100% virgin PTFE yarns. These are Self Lubricating yarns, no external Lubricant is Required. No Oil, no external Lubricant, no chance of burning. Ideal for Oxygen services and resistant to corrosive acids. This packing is designed to withstand all types of Chemicals under Severe conditions.


Service Conditions:

Liquid oxygen pumps & valves, acids, Alkalis, solvents, dryers, chemicals, air compressors.


Technical Specifications

рH Temp°C Pr.Bar Velocity Density
0-14 -225°C to 275°C upto 350 BAR 0-20 m/s 1.4 to 1.6 g/cm2
PTFE_Aramid_Packing
PTFE fiber packing of 100% virgin fibers.

This gland packing is made from combination of PTFE fiber at the faces and Pure Aramid at the corners. This design provides excellent dimensional stability and is recommended to use in Plunger pumps and pumps handling corrosive media. This is a non toxic, non contaminating packing.


Service Conditions:

Liquid ammonia, carbonate, Urea, oxygen pumps & valves, acids, food industry.


Technical Specifications

рH Temp°C Pr.Bar Velocity Density
2-12 -200 to 300 upto 500 BAR 0-20 m/s 1.4 to 1.6 g/cm2
Carbonaceous_Aramid_fiber_Packing

This gland packing is made from combination of Pure Aramid (Kelvar) fibers with dense impregnation of Carbon .The high content of carbon ensures excellent heat dissipation and very low friction which results in minimum shaft wear. The base fiber (Aramid) provides high strength and stability. Designed for aggressive and abrasive slurry pumps.


Service Conditions:

Hazardous and Abrasive media, Slag & slurry pumps, etc.


Technical Specifications

рH Temp°C Pr.Bar Velocity Density
0 - 14 300 250 Bar 25 m/s 1.4
GFO_(Gores_PTFE_Graphite_packing.)

This is Braided from Gore GFO PTFE graphite Fibers. This packing has a special blended lubricant which does not allow the packing to get hard thus minimizing shaft wear and gives longer life.


Service Conditions:

Oils, hydrocarbons, solvents, acids, alkalis, detergents, distilleries, chemicals, dyes, intermediates, pesticides, marine application.


Technical Specifications

рH Temp°C Pr.Bar Velocity Density
0-14 -240 to 300 upto 400 BAR 1.3 to 1.7 g/cm2 0-28 m/s
Pure_Aramid_fibre_packing

This is braided from Pure Aramid Fibers. These fibers are extremely strong and smooth. These fibers are treated with special quality High temperature resistant lubricant.


Service Conditions:

Solvent, acids, alkalis, oils, pharmaceuticals, gritty water, for sewerage application etc.


Technical Specifications

рH Temp°C Pr.Bar Velocity Density
2-13 -225 to 325 upto 400 BAR 0-28 m/s 1.3 to 1.7 g/cm2
Aramid_GFO_fibre_Packing_Rex

PTFE fibre packing of 100% virgin fibres This gland packing is made from combination of GFO® fibre at the faces and Pure Aramid at the corners. This design provides excellent dimensional stability and abrasion resistance. Designed for high pressure, high speeds having excellent resistance to abrasive media.


Service Conditions:

Hazardous and Abrasive media, dewatering pumps, fine slurr pumps, etc.


Technical Specifications

рH Temp°C Pr.Bar Velocity Density Size mm
2-12 -250 to +280 500 Bar 0-20 m/s 1.4 to 1.6 g/cm2 3 to 50
Pure_Graphite_Packing_Rex

This is braided from Pure Graphite fibers. This packing is non-corrosive, self lubricating and gives frictionless sealing providing good life to the packing and Sleeve.


Service Conditions:

Acids, Alkalis, Oils, recommended for High Pressure Steam applications. Not suitable for Nitric acid.


* RI- 181 will have Inconel wire reinforced.

Technical Specifications

рH Temp°C Pr.Bar Velocity Density Size mm
2-14 -200 to +600 300 Bar 0-15 m/s 0.9 to 1.3 g/cm2 3 to 50
Pure_carbon_with_Graphite_Packing_Rex

This gland packing is made from combination of Pure Carbon Fibers and Flexible Graphite yarns with Carbon fibers at the Corners and flexible graphite yarns at the core and face of the gland packing. This combination provides excellent flexibility and Compressibility. This packing is designed for High Temperatures, chemicals and for valve applications.


Technical Specifications

рH Temp°C Pr.Bar Velocity Density Size mm
0-14 -200 to +600 350 Bar 0-20 m/s 1.4 to 1.6 g/cm2 3 to 50
Ultra_Pure_Graphite_fiber_Packing_Rex

A 100% Pure graphite packing designed for extreme applications of High Temperatures and aggressive media. Manufactured using a premium grade of 100% high graphite Fibers treated with high temperature lubricant. This design Ensures excellent heat conductivity, low friction, high Temperature resistance resulting in Lower shaft wear.


Service Conditions:

Acids, Alkalis, oil, solvents, steam, Thermic fluid pumps, hot tar pumps, refinery services, etc.


Technical Specifications

рH Temp°C Pr.Bar Velocity Density Size mm
0-14 -250 to +650 350 Bar 0-12 m/s 1.4 to 1.6 g/cm2 3 to 50