Gland Packing

Manufacturers Of Gland Packing

RI-10

This packing is manufactured using 100% virgin PTFE yarns Densely Impregnated with Rflon PTFE dispersion which Enables it to handle high pressures. The packing has non toxic and inert constituents which ensue safety & purity of the Medium

Service Conditions:

Acid, alkalis, Gland areas where zero tolerance to contamination is required, dyes, paper, pulp,high Pressure valves.

Technical Specifications

рHTemp°CPr.BarVelocityDensitySize mm
0-14-225 to +2753500-20 m/s1.4 to 1.6 g/cm 23 to 50
 

RI-11

This packing is manufactured using synthetic PTFE yarns, they are suited for Low pressure in Food and pharmaceutical Industry

Service Conditions:

Clean water handing pumps & valves, Food, Chemicals and pharma industries.

Technical Specifications

рHTemp°CPr.BarVelocityDensitySize mm
0-14-200 to +2502000-20 m/s1.4 to 1.6 g/cm 23 to 50

RI-99

This is Braided from PTFE GRAPHITE Fibers, it has self lubricating property which assists dissipation of heat which ensures negligible hardness, no friction resulting in minimal shaft wear.

Service Conditions:

Oils, hydrocarbons, solvents, acids, alkalis, detergents, distilleries, chemicals, dyes, intermediates, pesticides.

Technical Specifications

рHTemp°CPr.BarVelocityDensity
0-14-240°C to 300°Cupto 400 BAR0-20 m/s1.3 to 1.7 g/cm2

RI-9

This gland packing is made from 100% virgin PTFE yarns. These are Self Lubricating yarns, no external Lubricant is Required. No Oil, no external Lubricant, no chance of burning. Ideal for Oxygen services and resistant to corrosive acids. This packing is designed to withstand all types of Chemicals under Severe conditions.

Service Conditions:

Liquid oxygen pumps & valves, acids, Alkalis, solvents, dryers, chemicals, air compressors.

Technical Specifications

рHTemp°CPr.BarVelocityDensity
0-14-225°C to 275°Cupto 350 BAR0-20 m/s1.4 to 1.6 g/cm2

RI-81

PTFE fiber packing of 100% virgin fibers.

This gland packing is made from combination of PTFE fiber at the faces and Pure Aramid at the corners. This design provides excellent dimensional stability and is recommended to use in Plunger pumps and pumps handling corrosive media. This is a non toxic, non contaminating packing.

Service Conditions:

Liquid ammonia, carbonate, Urea, oxygen pumps & valves, acids, food industry.

Technical Specifications

рHTemp°CPr.BarVelocityDensity
2-12-200 to 300upto 500 BAR0-20 m/s1.4 to 1.6 g/cm2

RI-6003

PTFE fiber packing of 100% virgin fibers.

This gland packing is made from combination of Pure Aramid (Kelvar) fibers with dense impregnation of Carbon .The high content of carbon ensures excellent heat dissipation and very low friction which results in minimum shaft wear. The base fiber (Aramid) provides high strength and stability. Designed for aggressive and abrasive slurry pumps.

Service Conditions:

Hazardous and Abrasive media, Slag & slurry pumps, etc.

Technical Specifications

рHTemp°CPr.BarVelocityDensity
0-14300250 Bar25 m/s1.4

RI-45

This is Braided from Gore GFO PTFE graphite Fibers. This packing has a special blended lubricant which does not allow the packing to get hard thus minimizing shaft wear and gives longer life.

Service Conditions:

Oils, hydrocarbons, solvents, acids, alkalis, detergents, distilleries, chemicals, dyes, intermediates, pesticides, marine application.

Technical Specifications

рHTemp°CPr.BarVelocityDensity
0-14-240 to 300upto 400 BAR1.3 to 1.7 g/cm20-28 m/s

RI-27

This is braided from Pure Aramid Fibers. These fibers are extremely strong and smooth. These fibers are treated with special quality High temperature resistant lubricant.

Service Conditions:

Solvent, acids, alkalis, oils, pharmaceuticals, gritty water, for sewerage application etc.

Technical Specifications

рHTemp°CPr.BarVelocityDensity
2-13-225 to 325upto 400 BAR0-28 m/s1.3 to 1.7 g/cm2

RI-63

PTFE fibre packing of 100% virgin fibres This gland packing is made from combination of GFO® fibre at the faces and Pure Aramid at the corners. This design provides excellent dimensional stability and abrasion resistance. Designed for high pressure, high speeds having excellent resistance to abrasive media.

Service Conditions:

Hazardous and Abrasive media, dewatering pumps, fine slurr pumps, etc.

Technical Specifications

рHTemp°CPr.BarVelocityDensitySize mm
2-12-250 to +280500 Bar0-20 m/s1.4 to 1.6 g/cm23 to 50

RI-18

This is braided from Pure Graphite fibers. This packing is non-corrosive, self lubricating and gives frictionless sealing providing good life to the packing and Sleeve.

Service Conditions:

Acids, Alkalis, Oils, recommended for High Pressure Steam applications. Not suitable for Nitric acid.

* RI- 181 will have Inconel wire reinforced.

Technical Specifications

рHTemp°CPr.BarVelocityDensitySize mm
2-14-200 to +600300 Bar0-15 m/s0.9 to 1.3 g/cm23 to 50

RI-612

This gland packing is made from combination of Pure Carbon Fibers and Flexible Graphite yarns with Carbon fibers at the Corners and flexible graphite yarns at the core and face of the gland packing. This combination provides excellent flexibility and Compressibility. This packing is designed for High Temperatures, chemicals and for valve applications.

Technical Specifications

рHTemp°CPr.BarVelocityDensitySize mm
0-14-200 to +600350 Bar0-20 m/s1.4 to 1.6 g/cm23 to 50

RI-650

A 100% Pure graphite packing designed for extreme applications of High Temperatures and aggressive media. Manufactured using a premium grade of 100% high graphite Fibers treated with high temperature lubricant. This design Ensures excellent heat conductivity, low friction, high Temperature resistance resulting in Lower shaft wear.

Service Conditions:

Acids, Alkalis, oil, solvents, steam, Thermic fluid pumps, hot tar pumps, refinery services, etc.

Technical Specifications

рHTemp°CPr.BarVelocityDensitySize mm
0-14-250 to +650350 Bar0-12 m/s1.4 to 1.6 g/cm23 to 50

Enquiry Form